Aggregate

Aggregate in construction

Table of Contents

What is Aggregate in construction?

Aggregates in building construction are small pieces of rock that are mixed with binding materials like cement, bitumen, lime, gypsum, or other adhesives to produce concrete or mortar. The aggregate offers the completed product volume, stability, resistance to wear and erosion, and other desirable physical attributes. Commonly used aggregates are crushed or broken stone, gravel, boiler ashes (clinkers), burned shale and burned clay. Types of aggregates include coarse aggregates and fine aggregates. Each type has several classifications based on shape, size, and type.

Types of Aggregate

The aggregates can be classified based on geographical location, shape, size, and weight:-

Classification based on Geographical location:-

Natural Aggregates

  • Natural aggregates are rock particles that require little preparation before usage.
  • It is available at the earth’s surface or can be evacuated from the ground, riverbed, and seabed.
  • They have high compressive strength.
  • Before using natural aggregates, they must be washed and cleaned.
  • Examples of natural aggregates include sand, gravel, crushed rock, granite, basalt, etc.

Artificial Aggregates

  • Artificial aggregates are man-made.
  • Examples of artificial aggregates are broken bricks, burnt-clay aggregate, blast furnace slag, and synthetic aggregates.

Classification based on Size

Fine aggregates

  • Particles that can pass through a 4.75 mm IS Sieve 
  • Mostly consist of sand and crushed/powdered stone.
  • Pit sand, river sand, sea sand, and crushed sand are all types of fine aggregates.

Coarse Aggregates

  • Particles do not travel. 4.75 mm IS Sieve
  • Coarse aggregates have qualities such as strength, hardness, toughness, and durability.
  • Crushed stone, gravel, shattered brick fragments, clinkers, and cyclopean aggregates are examples of coarse aggregates.
S.noClassSize
1.Very Small80-150mm
2.Large80-40mm
3.Medium20-40mm
4.Small4.27-20mm
Sizes of coarse aggregate for mass concrete works

Desirable properties of coarse aggregates for roads

  • Strength
  • Hardness
  • Toughness
  • Durability
  • Shape of aggregates
  • Adhesion with bitumen

Classification Based on the shape

Rounded Aggregates

  • Available in seashore gravel
  • A low ratio of water cement required
  • Minimum 30-35% voids
  • Poor interlocking causes weak bond strength

Angular aggregates

  • Have the good interlocking capacity
  • Maximum 38- 45% voids
  • Less workability
  • Good for maintaining the quality of concrete

Irregular aggregates

  • Partly nature made shapes
  • Maximum 35-37% voids
  • Pit sands and gravel are examples of irregular aggregates
  • Slightly higher bond strength than rounded

Flaky aggregates

  • Less thickness
  • Undesirable and have more voids, that need more slurry to bind them together

Elongated aggregates

  • A length greater than 180% of a particle means dimension.
  • lower workability

Properties of Aggregate

  1. Aggregate moisture content should remain steady.
  2. Free of harmful vegetable matter
  3. Flaky, angular, or elongated parts are not permitted.
  4. Should not include any substance that might corrode steel reinforcement.
  5. The aggregate must be firm, clean, and well-graded.
  6. Hardness, abrasion resistance, elastic modulus, and other characteristics are influenced.

Uses of Aggregate in Construction

  1. Aggregates are utilized in construction as both binding and independent elements.
  2. It increases the volume of concrete while decreasing the cost.
  3. They give dimension stability and accuracy.
  4. It reduces the shrinkage of the cement after drying.
  5. It is used as a basis and sub-base in road building.
  6. On railway tracks, somewhat thicker ballast is utilized to absorb vibration and secure the track.
  7. It is utilized in water and sewage treatment as a filtration agent.
  8. Fill material used for drainage, foundations, and backfilling.
  9. Used in Hardscaping.
  10. Aggregate in construction used in the production of concrete and cement

Advantages of Aggregate in Construction

  1. Less expensive
  2. Cost saving
  3. Easily available
Related articles
Ar. Raju Kumar
Ar. Raju Kumar

Ar. Raju Kumar, a proud graduate in architecture, is making strides in the professional world. With a deep love for both writing and architecture, Raju brings a unique view to his designs. His journey, enriched by a diploma and degree in architecture, shows his commitment to learning and growth. As a dedicated professional, Raju always looks for ways to improve his skills, aiming to make a lasting impact in the architectural field.

Raju Kumar (Asst. Architect)
Raju Kumar (Asst. Architect)

Ar. Raju Kumar, a proud graduate in architecture, is making strides in the professional world. With a deep love for both writing and architecture, Raju brings a unique view to his designs. His journey, enriched by a diploma and degree in architecture, shows his commitment to learning and growth. As a dedicated professional, Raju always looks for ways to improve his skills, aiming to make a lasting impact in the architectural field.

Leave a Reply

Your email address will not be published. Required fields are marked *

Table of Contents

Follow us
Latest Posts